Skip Ribbon Commands
Skip to main content
 

Telerik RadEditor for MOSS

 


Answer

Note! Do NOT use 'Cut'!

'Delete' has to be used to remove context material.

  1. Check-out the complete assembly (propagate operation).
  2. Open the product in CATIA.
  3. Open the product, with the lowest level instance with the material link, in a new window.
    1. Delete the material from the instance. (You can copy the material to the part itself before deleting it from the instance.)
    2. Close the window.
  4. Open the parent product of the previously treated product in a separate window and delete the material again from the same instance.
  5. Repeat the step above until the top product has been reached, delete the material from the instance also from the top product.
  6. In File -> Desk..., systematically clean with CATDUA (right-click) the parts up to the top product. It's important to clean "Bottom-up"
  7. Check in Edit -> Links that the material link has dissapeared.
  8. Save and Check-in the models.

Material link with "reference not found"

This arrives if a material in context is not deleted but removed using a "Cut" operation.

  1. Check the "From element" value and the "Pointed document" value. The "From element" value is the instance name.
  2. Add a Material on the "Pointed document".
  3. Copy that material on the "Pointed document".
  4. Open each subassembly, that is containing the "From element", in a separate window and 'Paste special as material link' the material to the "From element" instance(es).
  5. Delete the material from the instances.
  6. Delete the material added on the "Pointed document".
  7. Save and Check-in the models.